Color Snap®-M Snow Guards For Membrane Roofs With Traditional Pad

Part#: 5096-CSM

This Color Snap® single snow rail system has been specially designed primarily for Membrane roofs. The snow retention system attaches to membrane roofing using our traditional pad system. These snow guards provide significant labor savings by reducing installation times thanks to our pre-assembled clamps and easy snap-in rail. The included traditional pad system can be ordered in material that will match your existing membrane roof material. Complete your installation with our toolless, snap-in ice clips to prevent snow from sliding under your rails.

Color Snap®-M is best installed in applications where snow loads are moderate. Roofers can install a strip of roofing material in a groove on the front of the Color Snap-M rail, accenting colors or matching artistic hues from the rest of the structure. Most customers will find Color Snap's rail to be more than suitable for almost any snow load. (shown with PowerGrip Universal 7 Mount)

• Commercial low-slope roofs
• Provides a secure, watertight connection directly to the roof deck
• No cuts, wood blocking, flashing, or adhesives!
• Available in all commercially manufactured roof types such as EPDM, TPO, KEE, PVC
• Integral flashing heat welded to a thermoplastic roof surface. The adhesive is only required for EPDM.
• Unique patented design offers uncompromising strength
• Uses proven technology & products
• Assembly includes necessary Color Snap Bracket and traditional pad. (Rail, Connectors and Ice Flags are sold here separately)
• Installs in half the time of traditional products
• Color Snap® insert allows the installer to insert strips of colored material
• Load tested by third-party
• Typical installation on center 24” to 36”
• Ice Clips snap into place for easy installation
• Engineering layouts available from AceClamp

• Commercial low-slope roofs
• Provides a secure, watertight connection directly to the roof deck
• No cuts, wood blocking, flashing, or adhesives!
• Available in all commercially manufactured roof types such as EPDM, TPO, KEE, PVC
• Integral flashing heat welded to a thermoplastic roof surface. The adhesive is only required for EPDM.
• Assembly includes necessary Snow Titan Bracket and Membrane Pad. (Rail, Connectors and Ice Flags are sold here separately)
• Unique patented design offers uncompromising strength
• Installs in half the time of traditional methods
• Load tested by third-party
• Typical installation on center 36” to 42”
• Designed for spans up to 48"
• Ice Clips snap into place for easy installation
• Engineering layouts available from AceClamp